24小时服务热线： 15677114556 18978820229
1xN Optical Switch (Stepper Motor )
Application
●Ring network
●Remote monitoring in optical network
●Testing of fiber optical component
Dimension
Type A(N ≤ 32)
Type B(N ≤ 64)
Optical Route:
Pins:
Pin | I/O | Signal Name | Description |
1 | Input | /RESET | TTL, Low level reset to channel 0. High level means channel. selection bits are effective. |
2 | Input | D0 | TTL,D0 is low, and D4 is high, Example：00000b=1 CH;11111b=32 CH. |
3 | Input | D1 |
4 | Input | D2 |
5 | Input | D3 |
6 | Input | D4 |
7 | Out | /READY | TTL, Ready (High=Not ready, Low=Ready) |
8 | Out | ERROR | TTL, Error (High=Error, Low=No error) |
9 | Power in | GND | Ground |
10 | Power in | 5V | 5.0±5% VDC Power Supply (max 500mA) |
11 | S- | RS232(485) | RX (B) |
12 | S+ | RS232(485) | TX (A) |
Flexible Architectures
Specification:
Parameters |
| OSW-1xN |
Insertion loss | dB | 1 | 32 |
Typ:0.6 Max:1.0 | Typ:1.0 Max:1.5 |
Wavelength range | nm | 532~1300 | 1260~1660 |
Testing wavelength | nm | 532/650/780/850/980/1300 | 1310/1490/1550/1650 |
Return loss | dB | SM≥55,MM≥35 |
Crosstalk | dB | ≥-80 |
PDL | dB | ≤0.10 |
WDL | dB | ≤0.25 |
TDL | dB | ≤0.30 |
Repeatability | dB | ≤±0.05 |
Lifetime | cycle | 107 |
Optical input power | mW | ≤1000 |
Switching time | ms | ≤10 (Sequence switch time of adjacent channel) |
Operating temperature | °C | -40~+70 |
Storage temperature | °C | -40~+85 |
Power supply | V | +5 |
Dimension | mm | 135X40X32 (N<32),135X64X32 (N<64) |
Ordering Information : OSW-1xN-A-B-C-D-E-F-G
N | A | B | C | D | E | F | G |
| Fiber Type | Test Wavelength | sheath | Fiber Length | Connector | Control port | Size |
1 ~ 64 | SM: SM, 9/125 M5: MM50/125 M6: MM62.5/125 | 850: 850nm 1310: 1310nm 1550: 1550nm 13/15:1310/1550nm | 90: 900um 20: 2.0mm | 05: 5±5cm 10: 1±5cm 15: 1.5±5cm | OO: None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC ST:ST/PC | 01: TTL+RS232 02:TTL+RS485 03:USB | A:135X40X32 B:135X64X32
|
